Here is a model designed to remove moisture from your filament spool.
I have sized it so that it can be printed on both the BambuLab Mini and X1C.
This model can work with either printed rollers or 608-type bearings.
Use a 4mm hexagonal, allen wrench to screw the rollers…Not too tight, as it might break. Remember, it's not metal.
In case you are using the bearings, be careful to place the washer as shown in one of the photos.
Round Hygrometer: RoundHygrometer
I bought the cereal boxes on Amazon:
The model was designed in such a way as to be able to accommodate silica gel. I bought a 2kg pot of silica gel on Amazon:
Check my other models: https://makerworld.com/en/@manuziloop
**** If you enjoy my design, please give it a “BOOST” (click on the button)***
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.