CSW Endurance Button Box

Following the presentation of our M2 Steering wheel, we present another GT style wheel, the CSW Endurance Button Box, which is compatible with 70mm PCD quick releases like the Podium Hub or NRG/Simmagic/Moza QR's.

Parts:

Bolts, nuts, threaded inserts and standoffs: **

Threaded Inserts - https://cutt.ly/MH6U865

M2.5:

• 4 x Button 10mm long

M3:

• 2 x Button 7mm long

• 4 x Button 10mm long

• 2 x Flat 15mm long

• 6 x Flat 20mm long

• 12 x M3x3x4 Threaded insert

M4:

• 4 x Flat 8mm long

• 4 x M4x5x5 Threaded insert

M5:

• 6 x Flat from 25mm to 40mm long

• 6 x M5x7x7 Threaded insert

Electronics:

Depending in how you want to set up your wheel, you can try one arduino beetle and one blue pill or one pro micro and one arduino beetle.

• Blue Pill STM32 C8T6 - https://cutt.ly/hOSIzF6

• Arduino Pro Micro - https://cutt.ly/nI141Yt

• Arduino Beetle - https://cutt.ly/EwBaCSwD

• 2 x Rotary EC11 15mm long - https://cutt.ly/fOSYVtB or 2 x Bourns PEC11R-4215F-S0012 - https://cutt.ly/pGlU76L

• 10 x 12mm Metal Buttons - https://cutt.ly/53I5jS9 or 10 x 12mm Otto Replica Buttons - https://cutt.ly/43I5sEM

• 2 x ON-OFF-ON Toggle Switch - https://cutt.ly/MwBaC3xg

• 2 x Toggle Switch Cap - https://cutt.ly/wwBaVbiB

• 2 x Rotary Switch without knob - https://cutt.ly/wwBaViT3

• 2 x microswitches w35 - https://cutt.ly/ZUn32Nw

• 15 x PL9823 5mm Rgb Leds - https://cutt.ly/cI17wQT

• 1 x 2.7inch i2c 256x64 screen - https://cutt.ly/vwBaCCgw

• 1 x USB Hub - https://cutt.ly/H3I5mFl

Other materials/components: **

• 8 x 10x5mm Magnets - https://cutt.ly/YLbOaAr

• 2 x Axles screws - https://cutt.ly/PUn30jY

• 1 x GX12 4 or 6 Pin Connector

• 1 x 4 core cable - https://cutt.ly/hOSK8cA or coiled USB cable or 6 core cable

• 1 x 32mm Diameter Steering Wheel - https://cutt.ly/swBaVKWv

• 1 x 3mm thick aluminium/carbon plate

The .zip file includes all the 3mf of the model, renders, stickers, .dxf and .step files for cnc services and adapters to use on a thrustmaster and a logitech steering wheel. The diameter of the wheel is 320mm. All 3D printed parts can be made on a bed size of 235x235.

WARNING: This is not an easy design to build. Always remeber that you will need some previous experiences to build this wheel.

FOR PERSONAL USE ONLY - NON COMMERCIAL - NOT FOR RESALE

COPYRIGHT Canary Sim Wheel Designs - ALL RIGHTS RESERVED

You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model.

This design will require some high infill for the 3D Printed parts, from 60% to 100% and some good PLA, like PLA +, PLA850 or PLA870.

Also recommended for decorative parts 0.12 or 0.16. The rest can be made on 0.2 layer height.