Slide lid Box modeled at 1 1/2" x 2" x 6" with a 3/16" lid

This is a slide lid box that I developed for request. I printed multiple renditions tuning in the fit of the top so that I could have a box that worked well like this but did not need supports to print. This box also includes a screw hole feature so that if you want to screw it closed for a more permanent hold you can add a #6 screw.
There is also a model with holes in the back clearance for #6 screws for those wanting to attach magnets.

I have included the step files for the box and lid. The reason for doing this is that who ever purchases this can (if they know how) adjust the model to be the size they want.

I have also included a model of the box without it being hollowed out. This way (again if they know how) the customer can extrude what ever shapes into the inside of the box for miniatures, DIce or really whatever.

So this is really almost an anything you want it for box if you have basic CAD Skills. The fitment has already been worked out of the lid.

I took the base model and created the now included two slot card box with dragon image on the lid. I have included these files in with the others. The video here shows the steps on how to add an image to a step file in fusion 360 and how to then paint that image in Bambu Studio:

https://youtu.be/MjIxPPEFh2U

Supports NOT Required Or Needed
I printed these in both PLA and PETG without any supports using just stock came with the printer settings. I included a slightly smaller lid for PLA. The shrink in PETG and PLA must be different enough that the lid will work printed at size for PETG but it is too big if printed at size for PLA. Just scaling it won't get you quite what you need so I included that file as well.
Because all of this is included and done for you is why what seems like a simple box is 2.