N Scale House 'The Centerpoint' 1:160 Scale STL files

This is a 3D Printable N-scale model house. This design was commissioned by a previous resident of the home! This model does not currently include internal details, for buildings with internal detail please see some of my other listings. The file comes in two pieces, the 1st floor, and the Roof.

The model includes alignment features between all levels for convenience. The model levels can be glued together, I use Gorilla Super Glue Gel. The model can be painted, I use acrylic paint for PLA.

The dimensions of the assembled model are:

Width: 90.8mm or 3.56"
Depth: 87.6mm or 3.44"
Height: 49.0mm or 1.94"

To see some of my development work you can follow by facebook page at:
https://www.facebook.com/profile.php?id=61555215021512

If you have any questions please message me.

The model shown was printed on a Dremel 3D40 (non-heated) bed
Medium quality (0.2mm layer height) 60mm/s print speed
I slow down the speed of the first three layers to (15mm/s) for better adhesion
**I also use Elmer's Purple School glue to avoid ruined prints due to curling
**Within the roof model there is a 'sacrificial' chimney to ensure enough layer time. It can be removed if you add minimum layer times and lift the print head but I find this simpler.
The model shown with above settings takes 4h 16m print time and 34g of PLA