i used a 0.4 nozzle
with layer height 0.2
infill 10 %
support yes ( for Stand body and heart frame front recommended)
You also need
16 x M3 x 8 mm hexagon socket screws
and for the pic fixer 4 x M3 x 6 mm (i hadn't them for the second build so i used M3 x 8 mm too for this part ;-)
For the lamp i used a Wemos D1 mini. It fits perfectly in the ‘Stand Body’ part.
The lightstripe is a DC5V WS2812B
For the lithophane picture i used itslitho.com