Tire marker valve caps by Tvorim3D

Tvorim3D

Hobby & DIY>Vehicles

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, dualcolor

Designer

37 min

1 plate

4.5(4)

Boost

Released

Description

These markers you can use when changing the summer set of car wheels for winter set and vice versa. At the beginning of the next season they will help you know which wheel is which.

Used symbols readable without knowledge of any language.

Ready for dual color print. No supports needed. Recommended layer height: 0.08 - 0.12mm.

If the markers are too tight or loose, you can simply scale them in the slicer (it will only be a few percent and only in the X and Y axes).

Comment & Rating (5)

@user_2879209738

Print Profile

0.12mm layer, 2 walls, dualcolor

@timo19731

Print Profile

0.12mm layer, 2 walls, dualcolor

@DrS4v4g3

Print Profile

0.12mm layer, 2 walls, dualcolor

Strength Issue

Bed Adhesion Issue

The designer has replied

@Tvorim3D

Hello. I am sorry for your rating. I don't know what you mean by "strength issue" (but if you don't like PLA, use PETG, although PLA is plenty). Regarding the "bed adhesion issue" - it is necessary to thoroughly clean the hotbed, apply 3Dlack and perform bedleveling - none of this will affect my 3D model or print profile. It would be great if you could try again and let me know. Have a nice day.

(Edited)