Hinged glass top prop and handle
Copyright Claim
Hinged glass top prop and handle
Boost
35
74
23
Print Profile(2)
Plain - 0.08mm layer, 3 walls, 15% infill
Designer
39 min
1 plate
with Bambu logo - 0.1mm layer, 2 walls, 15% infill
Designer
44 min
1 plate
Boost
35
74
23
0
99
87
Released
Description
Print-in-place hinged glass top prop for venting the printer. Gives a wide opening to let out hot air to avoid heat creep and clogs when printing PLA and other plastics that does not like too much heat.
After some experimenting I found that just opening the glass top a few centimeters still trapped too much hot air inside, so I designed this to open quite wide and reduce temperature 3-4C degrees more.
Simply snaps in place on your glass top:
Comment & Rating (23)
All
Buen diseño
2
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
Was a little scared installing it, but once it popped on it works great.
1
Reply
Yeah me too :D
0
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
1
Reply
Print Profile
with Bambu logo - 0.1mm layer, 2 walls, 15% infill
Works great. Feels solid!
1
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
do not print this with fuzzy skin 😅 fit is very hard then
0
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
Other Issues:hinge fused together, seems to be too tight tolerance. but could be entirely my printer and it's issues
The designer has replied
0
Reply
make sure you have calibrated the filament, and use PLA. I have printed several in PLA with excellent result, but have not tested other materials.
(Edited)0
Reply
Replying to @_hsb_
thanks for the tip!
0
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
1
Reply
Print Profile
with Bambu logo - 0.1mm layer, 2 walls, 15% infill
1
Reply
Print Profile
Plain - 0.08mm layer, 3 walls, 15% infill
1
Reply
Print Profile
with Bambu logo - 0.1mm layer, 2 walls, 15% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld