"The Magic Y Splitter":The FDM 3D Printing Challenge “Y Splitter Without Quick Connectors”

Designed for use with Teflon tubing for bamboo expansion (inner diameter 2.5mm, outer diameter 4mm)

Are you up for a unique 3D printing challenge? We've meticulously crafted an FDM 3D printer accessory - the "Magic Y Splitter," specially designed for Teflon tubes, and its hallmark feature is the complete absence of quick connectors! Yes, you read that right. This ingeniously designed accessory leverages slight gap differences and friction, not only simplifying the installation process but also significantly enhancing the fun of printing. Moreover, it serves as an excellent tool for testing the precision of your printer. It's worth mentioning that this print piece weighs only 2.7 grams, making it incredibly lightweight yet durable.

Simplified Installation Guide:

1. Setting Off: First, thread the Teflon tube through clamp A.
2. Skill and Ingenuity: Next, thread the tube through the largest cylindrical print piece “L”. Please note, this cylindrical piece is not straight but is specially designed to accommodate the natural curvature of the Teflon tube, showcasing the cleverness of the design.
   • If it doesn't fit through, you might need to fine-tune your printer's settings, which usually indicates excessive extrusion.
3. Ensuring Stability: Then, close clamp A, after reaching the bottom turn clamp A by 90 degrees, and in the same manner, thread through and close clamp B and turn it 90 degrees as well. If done correctly, the cylindrical print piece L should stay firmly in place.
   • If it still moves, your printer may require further adjustments, possibly due to insufficient extrusion.
4. Fine Tuning: Gently cut along the middle of the cylindrical print piece L with a craft knife.
5. Finalizing Installation: Clamp on the “protective board” print piece.

Completed! You have now successfully installed the unique "Magic Splitter," not only adding to the fun of printing but also enhancing your skills in operating the printer. This is a fantastic opportunity to download the print files and take on this creative challenge. Let's embrace the endless joy and sense of achievement that comes with it! Plus, its mere 2.7 grams weight makes it an easy and enjoyable print task. If at first you don't succeed, try again; success means you've won the "Magic Y Splitter" as a prize!

"魔法Y分流器": FDM 3D 列印挑戰 “不需要快速接頭的y型管”
想不想來點不一樣的3D列印挑戰呢？我們精心設計了一款FDM 3D列印機配件——專為鐵氟龍管設計的「魔法Y分流器」，其最大的特點是完全不需要快速接頭！是的，您沒聽錯。這款設計巧妙運用了細微的間隙差異與摩擦力，不僅讓安裝過程變得簡單，同時也大大增加了趣味性。此外，它還是一款測試您列印機精度的絕佳工具。值得一提的是，這款列印件的重量只有2.7克，輕巧至極，卻不失堅固耐用。

簡明安裝指南：

1. **啟程：**首先，將鐵氟龍管穿過卡扣A。
2. **技巧與設計巧思：**接著，將管子穿過最大的管狀列印件L。請注意，這個管狀件並非筆直，而是專門設計來適配鐵氟龍管的自然彎曲，這正是設計的巧妙之處。
   • 如果穿不過去，可能需要對您的列印機進行微調，這通常表示出料量過多。
3. **確保固定：**然後，合上卡扣A，到底後將卡扣A轉90度，同樣方式穿過並合上卡扣B並轉90度。正確操作後，管狀列印件L應該固定不動。
   • 如果仍有移動，可能需要對您的列印機再次進行微調，這可能是因為出料量不足。
4. **精細調整：**使用小刀沿管狀列印件L的中間位置輕輕割開。
5. **完成安裝：**夾上保護板列印件。

完成！您現在已經成功安裝了這款獨特的「魔法Y分流器」，不僅增添了列印的樂趣，還提升了您操作列印機的技巧。這是一個絕佳的機會，讓我們一起下載列印檔案，挑戰這份創意與成就，體驗從中獲得的無窮樂趣吧！而且，它只有2.7克，輕巧易於列印。失敗再來一次，成功恭喜你得到「魔法分流器」這獎品！