Simple wall spool holder
Copyright Claim
Simple wall spool holder
Boost
2
3
5
Print Profile(1)
0.2mm layer, 6 walls, 25% infill Gyroide
Designer
1.4 h
1 plate
Boost
2
3
5
0
4
8
Released
Description
I was looking for a simple spool wall holder, that can be printed fast and at least to print 4 of them in the same plate.
So i decided to design it.
It needs a plastic pipe or wooden rod of 20mm.
The caps are desingned for a plastic pipe with OD 20mm and ID16.5mm
It was printed with the 0.20 Strength profile (25% infill and gyroide profile)
Comment & Rating (5)
All
Print Profile
0.2mm layer, 6 walls, 25% infill Gyroide
(Edited)
The designer has replied
0
Reply
Did you find any issue when printing? I printed 12 with same profile and it went perfect.
0
Reply
Replying to @Gustavooooo
Nope, it's ok
https://www.tiktok.com/@ignutablondu/video/7358014315804265760
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill Gyroide
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill Gyroide
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld