free late steamtrains for 2-4mm wargames

This model is designed specially for 2 to 4 mm wargaming.
1 locomotive and 1 trainset free to test.
And some pictures of other designs.
The design is optimized for printing in this scale, so you don’t need to adjust the size.
Test printing has been done on a Anicubic mono SE using tough resin.
For best result your printer must be calibrated and optimized. Use clean alcohol to wash your model and use a quality resin.
Before painting use a quality primer in a thin layer, so you don’t obscure the details.
All my models are designed for printing in a 5 to 15 degree back facing angle.
I use CHITUBOX for supports and UVtools to find problems with supports and to fix single pixel problems (will almost always be there in this scale).
The models are designed to true scale and can therefor look a little larger than other designers’ models. Only when needed I have thickened the dimensions so it can be printed and played with. An example is the legs of the horses – they need that thickness to be printed without breaking. My models are inspired from architecture ranging from the Middle Ages to apx. 1880, with some exceptions.
If you have ideas and suggestions don’t hesitate to send me a mail on rhvilhelmsen@gmail.com
And please - don’t distribute the files. I am a pensioner who like a little extra to buy resin to my printer.
And to motivate me to make more models. It takes a lot of time to design and test print (again and again) the models to make them as perfect as possible.
If you really like my designs, a little extra will be appreciated (you can buy a trophy).