Honkai: Star Rail - Misha Mop

This model is designed for Misha cosplay from Honkai: Star Rail.

It is the mop that he uses during his normal attack. This model has no other function other than a simple cosplay prop.

This model is cut in parts and pieces to fit in a printer with a platform size of 200mm x 200mm x 200mm. There is a picture with parts and pieces labeled to their file names in the preview section which you can refer to.

The head and pommel are cut into 5 parts and 2 parts respectively with each part sliced in half for a flat face that can easily lay on the printing bed.

There are cavities on the head as a guide to install the accessories (acc1 and acc2). You may need some sanding on the cavity if warping occurs.

For acc2, I make it into separated parts, acc2a and acc2b just in case you want to print the gem using other material or replace it with ready-made gem.

There are also tunnels with 10mm diameters punched on the model for alignment and bone installation purposes. You can use anything with similar dimensions or print the "peg" files included. It is a cylinder with a 9.5mm diameter.

To bridge the head and the pommel, you can print the included "pole". It is a 180mm cylinder with a 10mm diameter tunnel punch through. You can also substitute with a pipe or rod with a 25mm diameter.

To complete the prop, you will need to attach some fabric or Eva foam stripe on the mop head to replicate the yarn.

For scaling, please use the same scale for all the parts and pieces.

Cheers and Happy Printing!

Misha related:
Honkai: Star Rail - Misha Pocket Watch
https://cults3d.com/en/3d-model/fashion/honkai-star-rail-misha-pocket-watch

Honkai: Star Rail - Misha Accessories
https://cults3d.com/en/3d-model/fashion/honkai-star-rail-misha-accessories

Dimension:-
Head: 537.37mm x 289.21mm x 662mm
Pommel: 284.26mm x 57.31mm x 32.38mm