Supports minimum volume of 10cmx10cm smt steel mesh
BOM:
- 8x M3x4x4.2mm Heat Insert Nut (M3 thread with 4.2mm outer diameter, 4mm length)
- 8X M3X5mm Phillips countersunk screws
- 4X M4X15mm Phillips Pan Head Screws
Printing Tips:
- If you print with AMS, you need at least 5 layers on top of the four sliders
- Four of the weaker parts of the base needed to be strengthened. In the 3mf file I provided, I used the modifier and increased the fill to 60%
Gdemon X Watkins