Headphone Stand Gamer Hair - Beard Skull Nº1 by Cjwelcome

Cjwelcome

Art>Other Art Models

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Main Bearded Skull

Designer

14.9 h

1 plate

4.9(66)

Mounting Stand for Skull

Designer

1.2 h

1 plate

5.0(42)

DOOR HANDLE X1 & P1 0.08mm layer, 2 walls, 15% infill

2.1 h

1 plate

5.0(1)

Boost

425

617

158

1.1 k

540

Released

Description

Gamer Hair Headphone Stand for one of the coolest game room art decor pieces you can print this massive headphone stand will fit most generic size headphones tested on at least 3 various brands I have at home. Also comes with my own custom base mounting stand meant to take one command strip underneath to allow you to mount it to your game room entertainment center and place and pull your headphones without knocking it over or taking the skull with you while removing your headphones. Small drop of super glue on the stand post before assembling onto skull post hole. You may select any layer height you desire but I have profile set to 0.24mm to make it fast as I can get it.

Many thanks to Rogi Studios for their direct permission to remix their model, however makerworld is incapable of allowing remixs with special request cases like this so the link to their model is below!

https://makerworld.com/en/models/12931#profileId-12958

Also dont forget if you love their models to drop a follow to their patreon to support their future works!

patreon.com/rogistudios

Comment & Rating (158)

@Lumbi77

Print Profile

Main Bearded Skull

Great file, looks incredibly good. Printed in 0.16 with ERYONE Tri Color Silk PLA Gold Purple Black. Thanks

The designer has replied

@Cjwelcome

That looks awesome for sure and any tri color filament makes it look just 😘👌 perfecto! Check out Rogi studios as I remixed their model to make this and they have other great models to print also. https://makerworld.com/en/u/646390286

(Edited)

@Sentinel

I think this PLA would look great on Thanos or Batman model! nice print 👍

@EL_Hefe

I got the eryone silk also. Any recommendations on temps or settings? I was 10hrs in and it failed

@DropPunk

This thing is HUGE! I took the model into Blender and smoothed it down using subDs and some sculpting. It took 1day and 10 hours to print at .12 (I did a custom profile for it). I ran it while I was on vacation. It ran out of filament there and got a layer line on his forehead but I'm going to sand that away so no worries. I'm going to paint him up when I get some time but super happy with how this came out!

(Edited)

The designer has replied

@Cjwelcome

dang that does look good and what printer did you print on? my Bambu only took about 15hrs to print it out so if it was a more standard FDM machine a day and a half sounds about right. good luck with the paint job and send over more pics as I’m sure we would love to see it!✌️

@DropPunk

Replying to @Cjwelcome :

It was on a P1S in basic PLA at .12 with a few supports. I knew I had the time so I just let it go. It's damn near perfect.. if I hadn't run out of filament, I wouldn't have that line but I'll fix that.

@eddieg_130

@DropPunk wow! That looks great! I'd love your profile if you uploaded it.

@Sentinel

Print Profile

Main Bearded Skull

Amazing print. I used Flashforge Silk Dual Color (Blue and Green) PLA. It took a little under 24 hrs with 50% speed on P1S.

(Edited)

@SomethingKlever

WOW! This is incredible. I used Eryone in the same colorway, but your print looks like liquid silk. It's incredible. Did you make further changes while printing? Also, any setting recommendations on the fans, door, venting, etc? I want to print another model for a family member, but would love to get this effect next time. Even if it means getting a different brand filament. Just amazing.

@Sentinel

Replying to @SomethingKlever :

Thanks! I printed this with the print profile it came with but i printed this with 50% speed, rather the default 100%! Also make sure u scrub the plate with dishwashing soap and hot water for good min or two! this will ensure the model would stick well on the textured plate. Also run that leveling check in the begining. i will be printing another one as well but this time im planning to use a tricolor filament and maybe a matte one and will use the original model that doesnt have the headphone cutout on the head!

(Edited)

@user_794567753

Replying to @Sentinel :

Where can I find the original without the cutout? I’m new to the hobby so sorry if this is a dumb question. Your putting looks amazing!

(Edited)

@ryci

fantastic model and easy to print. printed in GEEETECH Silk PLA Bronze Rainbow

@Sentinel

ahhhh this one is nice color! maybe i print another one with this pla!

@Grunt031

Print Profile

Main Bearded Skull

This is an awesome print. I thought I had enough PLA Grey but as you can see in the picture I ran out. Guess I will need to try my hand at painting. Going to leave as is for now. Do you have any plans to do a Frankenstein one? Thanks a lot for the great work

The designer has replied

@Cjwelcome

Thats actually rather cool and makes it look like it was meant to be😂awesome print and thank you for the feedback

@Mause77

printed for my son in cheap PLA+, primer and asked him what hair color. Blue it is. Lovely model works great

@matt_minelli

Boosted

how did you paint that?! looks amazing

@Mause77

Replying to @matt_minelli :

black base. blue for the hair, brownwhite on the skull. then once dry drybrush the highlights with lighter shade of blue and white for the skull. Drybrushing is easy and gets nice results. Good luck!

@wages3dp

I absolutely love this model! I printed in Tronxy tri-color filament, red, purple, gold. Printed the original back in the day. Thanks for the file.

(Edited)

The designer has replied

@Cjwelcome

Dang now I gotta buy some more filament😂Looks amazing and so glad you like it!

@SomethingKlever

Print Profile

Mounting Stand for Skull

This worked out great. Printed the mounting base in black matte pla. Previously printed and reviewed the skull (amazing & 5stars). It was printed in two color eryone green-blue silk pla. Thank you.

(Edited)

@Sentinel

ah yeah the PLA i used is exactly like urs except mine was silk! i think urs looks better in matte! ill definitly reprint this with another dual or tri color PLA but i will use the original model without the headphone cutout!

@SomethingKlever

Print Profile

Main Bearded Skull

Incredible design. We used Eryone two color Silk PLA with no change in downloaded settings. It printed up like without any issues. However, it did take 19+hours, but I'm not going to complain. It's stunning. Thank you for sharing.

@Sentinel

this definitly looks better than the silk blue green PLA in my opinion…

@g.cernec

Print Profile

Main Bearded Skull

Very nice print 😀

@Sentinel

That looks good! what PLA is this? i might use this to print another one but print the model that doesnt have the headphone cutout on the head!

@g.cernec

The PLA is named "ZIRO Tricolor matte neon" 😀

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Mount for Gamer Hair - Beard Skull Nº1

Print Profile(3)

Description

Comment & Rating (158)

License

Related Models

Wall Mount for Gamer Hair - Beard Skull Nº1

Headphone Desk/Shelf Clamp

Skull with hair keychain

The PREDATOR Headset / Headphone Stand