Dum-E optional attachments. by NoycePrints

NoycePrints

Hobby & DIY>Other Hobby & DIY

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

ALL, 0.16mm layer, 2 walls, 20% infill

2.8 h

4 plates

5.0(23)

*A1M* ALL Attachments - 0.16mm layer, 2 walls, 20% infill

2.8 h

1 plate

5.0(9)

*P1P* Everything

2.4 h

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

34 min

1 plate

5.0(1)

Click to see more

Boost

523

803

1.3 k

353

Released

Description

Here is a collection of handy attachments for the Dum-E desk helper. All are simple to connect to the wrist, requiring only a single M3x10mm countersunk screw to secure. I aim to publish more adapters and attachments as time goes on. Let me know if there's anything in particular you would like to see made available.

Included are the following

Phone stand

Business card holder

Elastic band powered gripper

Logitech c920 Webcam clamp

Lamp attachment

Required for assembly

Phone stand

Print stand parts 1x Backing and Bottom. Recommend 20-30% infill for both. No supports.

Screws required: 2 M3x10mm countersunk screws.

Business card holder

Print card holder parts 1x left arm, right arm, backing and base. Recommend 20-30% infill for each. No supports.

Screws required:

2x M2.5x8mm countersunk screws.

2x M3x10mm countersunk screws.

Webcam mount for Logitech C920

Print webcam mount parts A and B. Recommend 20-30% infill for both. No supports.

Screws required:

2x M3x10mm countersunk screws.

Gripper attachment

Parts to print:

Gripper left x 1

Gripper right x 1

Gripper frame x 1

Gripper connecting arm x 8

Recommend 30% infill, no supports.

Screws required:

16x M3x8mm countersunk screws.

1x small elastic band (if you want it to function) This slots into groves on the sides of the arms.

Desk Lamp Attachment

Parts to print:

1xLamp attachment

1xBambulab LED lamp Kit 001

Optional 2x M3x5mm screws

Print at 15-20% infill

Coming soon:

Stationary holder.
Helping hands for electronics soldering.

Comment & Rating (66)

@plc_one

Desk Lamp Attachment is great!

The designer has replied

@NoycePrints

Glad you like it, thanks for the make 🙂

@plc_one

Replying to @NoycePrints :

I am already testing new attachments. I'll send you my prototype :)

@codemania

Are these the attachments for the lamp?

@Egon1986

How could you do that to me? I made one for a colleague, now I've got requests for 7 more. Am I the only one to have trouble locating m3*15 screws? Suggestions, if you are open for it: - Wall mountable (Screw slots in base would probably suffice) - a weight for the base (it tips over, when too far extended, under weight) - hand vise attachment (smaller version of: https://makerworld.com/en/models/31455?from=search#profileId-28008) Anyway, thanks a lot for that great Model <3

(Edited)

The designer has replied

@NoycePrints

haha sorry about that 😉 the weight idea is a great suggestion, I'll try and incorporate it into a future update. A wall/ desk mount base is coming with screw locating holes soon for the attachments update.

@plc_one

Print Profile

*A1M* ALL Attachments - 0.16mm layer, 2 walls, 20% infill

Looks really awesome. I have already tried all the extensions. I’m going to print a whole army :)

@NoycePrints

Awesome haha, more extensions to come 😉

(Edited)

@s1227656

Print Profile

*A1M* ALL Attachments - 0.16mm layer, 2 walls, 20% infill

可拆換工具。很讚的設計。馬上變枱燈

@xSpotix

Print Profile

ALL, 0.16mm layer, 2 walls, 20% infill

perfekt

@feld42

Print Profile

ALL, 0.16mm layer, 2 walls, 20% infill

@guenny86

Print Profile

ALL, 0.16mm layer, 2 walls, 20% infill

@guysread

I have the entire arm printed but I'm not quite sure how to attach the Logitech C920 camera to the extension from the photos given. Please help with a photo of some sort. Thank you!

The designer has replied

@NoycePrints

Hope these help mate. You need to attach the larger part A to the wrist first. Then clamp the webcam in with part B afterwards. There's a circular recess in part B for the webcam cable to go though.

@NoycePrints

few shots

@NoycePrints

Not sure if you have the files but webcam clamp parts A and B are available in a separate upload on my profile titled Dum-E optional attachments.

@user_1654217300

file did notwork comes up with error message. Deleted and tried second time same result.

The designer has replied

@NoycePrints

Thanks for letting me know, I'll get right on It as soon as I finish work. I've heard similar things from a few users now, appears to be a bug on the site end but I'll check it out and update once I've had a look.

(Edited)

@NoycePrints

Replying to @NoycePrints :

Hi there mate, I've just checked and everything seems to be fine. If you select "raw model files" all the STL's should download to your PC in a Zip folder. Simply extract all and you should be able to drag them into your slicer. Hope this helps.

@diloretodg74122

This is an awesome project. Which part am I supposed to print for the lamp attachment?

The designer has replied

@NoycePrints

Sorry for the confusion, I just updated the upload. You need to print 1x Lamp attachment stl in order to mount the LED lamp.