Suspended Bulbasaur Incubator by fay3dlab

fay3dlab

Miniatures>Animals

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

MULTICOLOR 0.2mm layer, 2 walls, 10% infill

Designer

51.7 h

6 plates

5.0(1)

Boost

190

252

225

Released

Description

Here's a new pokemon for my Pokemon Suspended Collection..

This time its bulbasaur.. The model is printed in multicolor and used the Bambu LED kit 001 for the lights..

You can put 2 of the LED kit on the top and bottom of the incubator..

The top part of the incubator has a dummy/support that needs to be remove so you can insert the color screen..

To assemble the suspended charmander is going to take a little patience:

If you are going to install the LED kit like mine.. there will be a channel in the back side of the frame holding the suspende model.. this is for the USB cable of the LED kit..
insert the cable and carefully close the 2 half.. you should leave some slack on the top
now use double sided tape on the LED kit and tape it to the top incubator.. there should be a channel for the wires too..
if you want to defuse the bright light you can use the screener i provided.. there should be grooves to insert the it..
now slowly cap the 2 half of the suspended charmander
once close.. you can cap the bottom holder of the suspended model.. there should also be a channel for the USB cable
lastly the place it on the bottom piece of the incubator and there is also a slot if you want to put another LED kit for the bottom..

and you done..

If you're thinking of buying the LED kit or the filaments.. please do support me by using my affliate link here.. every little purchase helps me out..

LED LAMP KIT 001

Filaments:
PLA Matte Ivory white: https://shrsl.com/4hkxy
PLA Matte Dark Green: https://shrsl.com/4hkxx
PLA Matte Green Grass: https://shrsl.com/4hkxw
PLA basic Green: https://shrsl.com/4hkxu

One important thing to remember when printing suspended model is to set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..

I hope you guys have fun printing the suspended charmander..

If you would like to support me, you can join me on my buymeacoffee page..

By joining me as a supporter.. you'll be able to get behind the scenes information

on my current projects as well as future projects..

And if you're looking to sell my prints.. you can join my merchant membership tier as low

as USD10 a month..

Comment & Rating (12)

@HandOfTheFool

came out a lot better than I expected super happy with it. there was a small issue with the top led mount the insert was on the opposite end but overall great design. hoping to see a squirtle to complete the trifecta

@LJTT

hey man what Colour greens did u use

The designer has replied

@fay3dlab

Please support me by using my bambulab affiliate links if you're thinking of buying bambulab's filament.. PLA Matte Ivory white: https://shrsl.com/4hkxy PLA Matte Dark Green: https://shrsl.com/4hkxx PLA Matte Green Grass: https://shrsl.com/4hkxw PLA basic Green: https://shrsl.com/4hkxu

@LJTT

Replying to @fay3dlab :

hey man could u tell me how to use ur link sorry new to this lol

@fay3dlab

Replying to @LJTT :

just copy paste the link to browser and it will direct you to bambulab store

@xakmom07

My son wants to know if you can do one with a Pokemon egg since its an incubator.

The designer has replied

@fay3dlab

You should go to my page.. I already did the egg incubator

@xakmom07

Replying to @fay3dlab :

nice will check it out

@Codecorrupted1

These are so cool, would love to see a mew or mewtwo since they were created in vials. So creative!

@Telanea

This looks so good, wanted to print it but sadly the Dimension of plate 1 and 2 is a little bit (Around 8mm) too high for the A1 Mini. Is there any way to reduce the height by 10mm without compressing it?

The designer has replied

@fay3dlab

You could try scaling it down bit by bit and see if the strings still shows up? I've seen someone did it with the raptor incubator but I dint remember how much did he scale it down to..