A model of the golden gate bridge in San Francisco
How to make:
- Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts.
- Connect the two roads with two pieces of filament (about 14mm)
- Press the roads in to two of the suspension (bridge) parts
- Add the arcs and trusses
- Press the other half of the suspension (bridge) together.
- Finished!
Print settings:
- 0.2mm layer height (important!)
- Slow first layer, and/or good adhesion
- 0.4-0.6mm nozzle
When slicing, the trusses and strings should look like this: All in one line without any start/end points in between.
Enjoy!