YAMA - GHOSTRUNNER SWORD FOR COSPLAY - STL MODEL 3D PRINT FILE

Atention: Please, this 3D model is only for personal printing (Please contact me if you want to use it for Commercial Purposes )

All files are in STL format.

Model printed in parts.
3 cutting variations for sword printing are available:

CUT TYPE 1 - STL file with the blade (Only the blade! The handle, the capsule and the glass are split for printing in all cut variations, with pins to fit them together) made for full printing.

CUT TYPE 2 - STL file with the blade divided into 5 parts and the handle divided into 2 parts, with pins to fit them together. (Again: The handle is split for printing in all cut variations)

CUT TYPE 3 - STL file with the blade divided into 10 parts and the handle divided into 4 parts (Unlike the other versions, in this one the cable was also divided in the middle), with pins to fit them together. (Important: This cutting model for 3D printing was made with a vertical cut to divide the sword in half). Perfect for small 3D printers.

Size: 973,77mm (97,3cm)

OBS: I recommend printing the glass part (That fits over the capsule) in transparent resin for a better finish.

The STL files are able to be printed as a cosplay item.

This model is a dummy replica item for cosplay.

-For stable 3D printing, I recommend using the Simplify or prusa software of the official latest version.

This 3D model of the Yama sword was made for fans of the game Ghostrunner and also for everyone who likes swords in general. It can be used for both display and cosplay.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.1
Perimeter Shell 3
Fill 10/15%
Supports are needed
Speed 60-70%