螺丝批头收纳盒 Screwdriver bit storage box
Copyright Claim
螺丝批头收纳盒 Screwdriver bit storage box
Boost
5
5
1
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
0.2mm layer, 2 walls, 15% infill PLA
1.3 h
1 plate
Boost
5
5
1
0
10
0
Released
Description
适用于6.35mm或者1/4英寸的螺丝刀批头。
如果想让盖子合上，则螺丝批头的长度应该小于26mm。
一个盒子需要32个磁铁，磁贴的规格是4*3mm，4为直径。
Suitable for screwdriver bits with a diameter of 6.35mm or 1/4 inch.
If you want the lid to close, the length of the screwdriver head should be less than 26mm.
A box requires 32 magnets, with a size of 4 * 3mm and a diameter of 4.
Comment & Rating (1)
All
挺好的设计，手头正好有不少4*2就打了个。底座上侧的四个磁铁位有点儿松，可能需要胶粘下，设计方面可能做成底面稍微收缩一点加强摩擦的效果会比较好。顶盖磁吸目前有点不合理，打开时稍微歪一下可能会带起附近的批头，其实靠层纹就能比较好的卡住盖子了。
0
Reply
No more
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld