SKADIS container insert with practical small parts compartment for the IKEA metal container with 11 compartments as an STL file for 3D printing yourself

The SKADIS container is a practical collection point for pens, brushes and other items for the SKADIS perforated plate from I K E A.

Pens etc. tend to get mixed up quickly in the SKADIS metal container.

We offer our container insert as a solution.

Separate the IKEA SKADIS metal container into 11 compartments, making it ideal for pens, brushes or other utensils.

As an extra, there is a practical removable small parts compartment for paper clips, screws and anything else that tends to get lost.

With the digital file you can now print as many as you need and in any color you have available.

When creating the model, we make sure that you need little to no supports when printing.

This is also the case with this variant from us, no supports are required for printing.

Our contribution to a sustainable future.

Suitable for:

IKEA metal container for the SKADIS pegboard

7.5 cm x 9 cm x 8 cm

this variant with 11 compartments has the following compartment sizes:

8 compartments with 16mm x 16mm (1.6cm x 1.6cm)

2 compartments with 16mm x 16mm one corner round (1.6cm x 1.6cm)

1 compartment with 16mm x 35mm (1.6cm x 3.5cm)

Small parts compartment in 3 different versions.

1 compartment with 20mm high

1 compartment with 30mm high

1 compartment with 40mm high

The filament color of the respective insert is visible from every angle thanks to the attached edge on the insert.

The construction is from our company.

We made sure that all kinds of different utensils fit inside,

and that they are optimally sorted - e.g. pens, tools, paper clips and much more.

Are you missing something for your pegboard that doesn't exist yet?

Then just write to us, as 3D designers we have various ways of making dreams come true.

Non-commercial license:

The products are sold exclusively for private use;

any commercial resale of this product or parts thereof with third parties is strictly prohibited.

Copyright is not transferable with sale.

If you have any questions or are unsure,

then simply write to us.

Layer height: from 0.08 - 0.2

Printing speed: 50 - 200 mm/s

Supports are not required

Filling: 5 - 100%