AR-15 to Ruger 10/22 STOCK

Allows the use of a Ar-15 Stock and Grip to be mounted to a Ruger 10/22 .22lr rifle as a replacement stock.

I am using 3mm x 100mm Steel rods for this stock's two part print. They will provide more structure and they are easier to find on Amazon.
This model does not yet have a textured version like my Marlin/Glenfield stock does.
__________Disclaimer_________

My 3d printer needs some repair at the moment so I have not been able to print this model to test it out myself. If you have any issues with the model feel free to send me a message (with a good description of the issue and maybe some pictures) and an update to the model will be made ASAP.

This print is going to be vary heavy! Use lots of supports if you print in resin. FDM print at your own discretion.
Here is my recommendation:
(For resin printing) - Place (Front End) so the rifle cutout is facing the bead of the printer at a 45 degree angle and use heavy tree supports with a 80% density. Place (Back End) the same way so the threads and grip mount are at the top of the print. This way the thread pocket will not create a suction effect and ruin the print. All so at a 45 degree angle with heavy tree supports and 80% density.
You will need 6 steel rods as pins to glue both side together. Rod size must be 3mm diameter by 100mm long. May need to file down rod by 0.5mm to fit flush if pin holes are not washed well. Use a good Super Glue or other Cyanoacrylate Glue to assemble.