IPHONE HOLDER 2 WITH PASSIVE STEREO AMPLIFICATION

Desk phone holder, special for video calls and video conferences, hands-free use, with a characteristic design.
It is a universal support for almost all types of mobile phones, the peculiarity is that it captures the stereo audio signal and transfers it through a pair of horns on the front of the phone, improving listening.
In the lower part there is a hole for the passage of the power cable, there are also 2 other windows to convey the signal from the telephone speaker to the pair of horns.
On the iPhone (but also on many other brands of cell phones) there is a stereo speaker located at the bottom right.
The holder is made from a single piece and no printing supports or glue are required.
To facilitate printing, in addition to the STL files, I also attach the GCODEs for Ender3 created with Prusaslicer 2.7.1 so you can print them immediately.

Printed in PETG, but it is also possible to print it in PLA in this case provide at least 6 perimeters. First layer 0.4 mm, the others 0.2 mm, the model shown was created with a free software called Prusaslicer 2.7.1. No need for a raft layer, but a spritz of hairspray on the print bed is a must (mine is glass) 4 perimeters, 20% infill, 6 lower layers and 6 upper layers.
print bed temperature 70 °C
nozzle temperature 240 °C
linear infill 20 %
4 perimeters