Lego Board Replacement For Duplo Lego Table
Lego Board Replacement For Duplo Lego Table
3D
Published 2024-02-22T13:05:42+00:00
Exact replica lego build plate for vintage Duplo Lego table.
Just print 2 of each of the files named (sections1-2-fixed / sections3-4-fixed) and glue it all together!
The fully assembled board and "largediameter" files have slightly larger pegs for any clearance lost if you intend to use vapor smoothing, or the other files don't produce a tight fit on your printer. Same process print 2 of each and they'll fit together.
OpYellowBird's Setup:
Printer: Flashforge Adventurer 5m Pro
Material (As Pictured): ABS (Inland- Sprinkle Grey)
Nozzle temp: 260*C
Bed Temp: 100*C
Layer height: 0.1mm (first layer 0.2mm)
I enabled Ironing on top surfaces (personal prefference)
First layer speed: 10-25mm/s
Print Speed 25mm/s (ABS, for PLA: first layer speed 25mm/s and all other layers 50mm/s or significantly faster if your printer doesn't get angry at high speeds)
| Date published | 22/02/2024 |
| Support Free | YES |