Gaslands 16mm Skid Dice
Gaslands 16mm Skid Dice
Print Profile(0)
Description
16mm skid dice for Gaslands and Gaslands Refueled.
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.05
Infill:
100%
Filament:Resin Resin Grey
Notes:
I printed mine with Anycubic Grey resin with stock Photon Workshop print settings. Tried a few orientations and the best that worked for me was parallel to the build plate with a boat load of supports on just one side.
Finished dice!
What I did
After removing the supports I sanded the surface as smooth as I was able, then primed in black. I then carefully applied a few coats of screaming skull to the faces of the dice, 3 sides at a time until I achieved full coverage. Haven't varnished yet but that'll be the next step, and so far I think they look great!
Downloaded the free skid dice template from the Gaslands website and brought into Affinity Photo where I blocked in the designs (by default they have a splattered paint effect which isn't ideal) before converting to SVG and applying to a simple filleted 16mm cube in Fusion 360.
Please note the designs are not perfectly centered as Fusion 360 apparently lacks this ability? But in any case I tried my best to center them and I don't think any misalignment is noticeable at all.
Category: DiceComment & Rating (0)
License
