Hello!

This is one of the more colourful project's I've made and I'm pretty happy with!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Blue Gray Transmission Distance: 3.1
    PLA BambuLab Basic Orange Transmission Distance: 5
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Charcoal Black
    At layer #9 (0.8mm) swap to Red
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Orange
    At layer #16 (1.36mm) swap to Ash Gray
    At layer #18 (1.52mm) swap to Yellow
    At layer #19 (1.6mm) swap to Jade White for the rest.
 

Please feel free to share your results!