Darth Vader creado por IA con la estrella de la muerte al fondo, en color creado con Hueforge, modelo numeri 1, descarga el que mas te guste

print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Jade White
At layer #14 (1.2mm) swap to Red for the rest.