Little Monkey HueForge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Paramount 3D Castle Limestone Gray Transmission Distance: 3
PLA Paramount 3D Silver Dollar Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Castle Limestone Gray
At layer #13 (1.12mm) swap to Silver Dollar
At layer #16 (1.36mm) swap to Jade White for the rest.
Check out my other works to complete the collection:
Kitten : https://makerworld.com/en/models/199977#profileId-220532
Doggie : https://makerworld.com/en/models/200472#profileId-220949
Baby elephant : https://makerworld.com/en/models/201680#profileId-222068
Little Lion : https://makerworld.com/en/models/202528#profileId-222895
Little Tiger : https://makerworld.com/en/models/206486#profileId-226652
Bambi: https://makerworld.com/en/models/206784#profileId-226917
Little Squirrel : https://makerworld.com/en/models/207207#profileId-227325
Enjoy