Woven Easter Basket by JamesThePrinter

JamesThePrinter

Household>Festivities

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

Full Basket

Designer

5.3 h

1 plate

4.8(59)

50% Scale, Thicker Bottom, Eastern Basket and Handle, 0.18mm layer, 2 walls, 25% infill

1.9 h

1 plate

5.0(5)

75% Easter Basket, Handle Attached, Thicker Bottom, 0.18mm layer, 2 walls, 15% infill

5.8 h

1 plate

120.6 % Scale

7.9 h

1 plate

Boost

128

193

445

443

Released

Description

Woven easter basket with a moving handle. The basket is large enough to easily hold 18-24 eggs.

Additional components needed:

2 M3x12 bolts - button head bolts look the nicest for this model
2 M3 nuts - locknuts recommended

This is part of my Woven Series. You can view all of my Woven Series models in this collection.

Print Settings

A brim may be needed for the handle.

Assembly

Insert the nuts into the appropriate holes on the inside of the basket. Insert the bolts through the holes in the handle. Push them through the holes in the basket and screw into the nuts. My suggestion is to tighten the bolts just until the handle can stay upright on its own.

Buy Me A Coffee

The filament used in the pictures above is polymaker PolyTerra Lavender Purple PLA

Comment & Rating (75)

@TJ75

Print Profile

Full Basket

Very nice! Model and print settings work like a charm. Thank you for the work! - I used Sunlu PLA Rainbow 04 (not Silk) for this print.

(Edited)

@Blast3dPrints

what filament was this?

@OzDruiD

Replying to @Blast3dPrints :

Agreed @Tj75 - was this some kind of Gradient, like Poily Terra Gradiant Rainbow? or another brand?

@TJ75

I used Sunlu PLA Rainbow 04 (not Silk) for this print. :)

@pezliz

My favourite basket!!

@OzDruiD

@pezli Looks awesome . will check it out later.. Keen on the name of gradient, I was going to prolly try Poly Terra Gradient Rainbow? Thoughts? Bright enough or do you have another suggestion?

@pezliz

Replying to @OzDruiD :

Yes! This is the Pastel Rainbow Gradient by Polymaker! I need to take a photo of the Translucent Green PETG Basket too!

@kilolima

Print Profile

Full Basket

Super nice design and profile. made almultiple ones since all kids need to be served ;-) Filaments used were: Bambu Lab PLA tough blue lavender Jayo Meta PLA yellow Anycubic PLA neon green (4y old!)

@Radius

Print Profile

Full Basket

good :)

@edrakko

Print Profile

Full Basket

Perfect!! Well defined details.

@GantharTheWise

Print Profile

Full Basket

Excellent model! Came out perfect using Atomic Filament Silk Aqua!

@desislav.ivanov

Thank you for the work! My wife loves it! I used eSUN ePLA-Silk Rainbow

@BinaryGrind

Print Profile

Full Basket

Excellent design and printed beautifully in iSANMATE Rainbow PLA+. I did print the handle after the basket so I could get a more color that matched the top rather then the bottom. Finished up with some Nylon M3 bolts and washers. Far and away better then anything I found in the store for easter. Thank you!