--------------------------------------------------------------------------------------------------------------------------------
This key ring is made entirely by me starting from my design, I hope you like it🙏
if you want a key ring with your favorite pokemon leave a comment with your request, I will try to make it🔥
HUEFORGE Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #24 swap to Orange
At layer #31 swap to Yellow
At layer #34 swap to Jade White for the rest.
This is simply resizable directly in Bambu Studio using the scale function as follow (Note that you must not modify Z axis dimensions):
--------------------------------------------------------------------------------------------------------------------------------
-If some stringing occour you can simply remove it using your lighter as follow:
Use the flame for only few seconds and you will be surprised by the result! from left to right picture like magic😄
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.