Gyros Hueforge from Jojos Bizarre Adventure
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Black Charcoal: 0.3
PLA Esun Dark Matte Gray Transmission Distance: 0.8
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Gray 1.3
At layer #12 (1.04mm) swap to Fossil Grey
At layer #14 (1.2mm) swap to Cotton White for the rest.