Using a 3D scanner I have designed a magsafe phone holder that perfectly fits into the storage cubby in the Ioniq 5 next to the usb port for carplay/android auto.

It has a small cable hook at the bottom which should fit most cables but can also be gently heated to accomodate other cabe thicknesses. I used these magnetic cables to make it easy to connect my phone: https://www.amazon.co.uk/dp/B099KGKR8Q?

_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_03EX4M52G6PRDT5P0FS4

To make the 3D print work with magsafe I used these magsafe magnets I found on AliExpress: https://s.click.aliexpress.com/e/_EH0Xvh3

I used the magnets with the white coating on them which hives it a clean look. I would recomend to add some small drop of super glue when sticking the magnets down to make sure they don't detach.

It has been sized so that the phone is a reasonable distance away from the cable to allow for even a iPhone Pro max size phone to fit as well.

There are 2 plates in the profile provided one for PLA and the other for PETG.