Hi capa slide

Hi capa split slide
HI capa split slide. Works with Tm hi capa.
Lightened for reduced weight and less blow back
Lightened with increased strength
Reduced weight could cause the part to be weaker

No rear sight or front sight needed.

No guide rod plug required

I do not give permission to publicly publish or resell the files you have purchased from this adapter. I do not give permission for commercial production of finished products based on these files. Only for personal use.

Disclaimer: By downloading and using these 3D print files, you acknowledge that I, the designer, am not liable for any injury, damage, or harm that may result from the use of the printed objects. The files are provided as-is, without any warranties, and it is your responsibility to use them safely and appropriately. Always exercise caution and follow appropriate safety guidelines when handling or using 3D printed objects, testing and playing airsoft.

Printed on bambu lab p1s

Pla settings
240c nozzle
55c textured pei bed
4 walls and 50% gyroid infill

Hips settings for improved part strength
260c nozzle
100c engineering plate
4 walls and 50% gyroid infill

Printed with 0.2 layer height
Smaller layer height = more detail
Support is mandatory
All printed with (slim) tree supports
Print both flat on bed for smoothest action