Outline:
I wanted to have my bags out of the way, so I designed this simple bag hook that I've screwed into the side of an Ikea Pax.
Print Suggestions:
The model is designed for zero supports and optimal strength. Use the orientation in the 3D files. I suggest you print this in PETG or ABS, but it should be totally fine in PLA.
I would do at least 5 walls with 25%+ infill if planning to use these with filled bags.
Hardware:
Current version is designed for 3mm flathead screws. If there happens to be a demand for modifications, I'll be happy to upload adjustments.
There is another mount included if the original is too tight, as well as a step file of the mount.
It's my first upload, please let me know what you think!