sidearms2055

hitokiri

IMG_1199_5b2573cd-4b3a-4420-a99c-18a41b166488.jpeg

IMG_1199_5b2573cd-4b3a-4420-a99c-18a41b166488.webp

plate_1.png

plate_2.png

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA BambuLab Tough Black Transmission Distance: 0.6     PLA BambuLab Matte Ivory White Transmission Distance: 4     PLA BambuLab Tough Black Transmission Distance: 0.6     PLA BambuLab Matte Scarlet Red Transmission Distance: 2     PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions:     Start with Black     At layer #13 (1.12mm) swap to Ivory White     At layer #19 (1.6mm) swap to Black     At layer #27 (2.24mm) swap to Scarlet Red     At layer #35 (2.88mm) swap to Ivory White for the rest.  If you resize the model, don't change the z.if you print  also the picture frame, i suggest to use a 0.2 mm standard profile for it

0.08mm layer, 2 walls, 100% infill

this is a hueforge model of a picture of kenshin himura from anime Rurouni Kenshin. i make also a picture frame that you can print in a second plate.

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

Reverse Blade Collapsing Katana - Rurouni Kenshin

Rurouni Kenshin logo Stand + Keyring + Coaster

Rurouni Kenshin JAP logo Stand + Keyring + Coaster

Hueforge - Star Wars - AT-AT Walker

rurouni Kenshin hueforge