Print Profile(1)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
1.2 h
1 plate
Boost
209
278
32
1
536
268
Released
Description
Please like my design <3
-
Do NOT sell this design online (Etsy, Ebay, website…)
Do NOT share/upload the files anywhere else
-
Want to make money 3d printing?
Join my free group: https://www.skool.com/help-me-3d-printing-8252/about
-
Want to a commercial license to sell all of my products?
Join my paid group: https://www.skool.com/make-money-3d-printing-1698/about
Comment & Rating (32)
All
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
.4mm nozzle, .12mm layer, 3 walls, 15% infill - turned out really well.
2
Reply
I started with the .2mm 3mf and switched over to .4mm before printing as I didn't have a .2 handy
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Nice profile, but I would recommend printing it with 100% infill for extra strength.
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
fast fun print
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Love these! I change the settings to print both at the same time so I could do multicolor ones!
0
Reply
Good print - will need to print with support printing the croc and base separately
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
turned out great!
(Edited)0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
These are awesome! So cute! They are fairly easy to print. i have to print them with supports, due to the button under the little shoes. but, I was able to print several at a time, and quicky.
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Bien. 👍
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
all ok
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
CUTE!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld