Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Default White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #6 (0.56mm) swap to Black
At layer #8 (0.72mm) swap to Black
At layer #10 (0.88mm) swap to Black
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to Jade White
At layer #16 (1.36mm) swap to White
At layer #18 (1.52mm) swap to Black
At layer #19 (1.6mm) swap to Black
At layer #20 (1.68mm) swap to Black
At layer #21 (1.76mm) swap to Red
At layer #22 (1.84mm) swap to Red
At layer #23 (1.92mm) swap to Yellow
At layer #24 (2mm) swap to Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.