Modular Dungeon Cave Tiles

The following is a very large set of STL files that can be used to create highly modular dungeons that are easy to store. The set includes 94 wall variants of various sizes ranging from 3 inches long to 7inches long. 74 floor variants are also included that range in sizes of 3x2, 3x3, 5x3, 5x5, and 7x7 inches. Fully compatible with our stone Dungeon set.

These dungeon tiles include two connection options using (a) 5mm Diameter by 2mm thick magnets (such as can be found on Amazon) or (b) a 3D printable clip that allows tiles to be pushed together or simply set down next to each other, holding the tiles together when they are on a table. Instructions are included with pictures to show how to assemble the tiles. Some super gluing (or glue equivalent) is required.

All wall heights are about 35mm (1.4 inches) and should not obstruct the view of 28mm figures on the tiles. A third option is to use only the floors (for those who do not like walls). The tiles shown in the photographs were printed using an SLA (resin) printer (due to the detail of these files, I would recommend resin, though FDM may also be possible with less detail).

This set also includes various decorations including a wooden bridge, two types of stairs, and stalactite scatter terrain that may be equipped with 3mm LEDs and space for a 20mm battery. I am currently working on a simple LED/battery holder but have yet to make one that I like.

Files shown were printed on an Elegoo Saturn 3 at default settings using 8k Elegoo resin.