Really liked the vented riser that Tony F made; simple, clean and effective.
After I printed it though, I wanted to add an LED strip like I had with my other printer. maCyo42 has come up with a really nice LED strip mount on his riser remix. It has a deflector to reduce LED glare coming out of the top of the printer.
So, I combined the LED strip mount from maCyo42's Bambu riser with Tony F's K1 Max riser.
I've uploaded files for two scenerios:
I ended up using my Bambu printer to print these as my K1 Max was busy doing big bed things. So, I made use of a lot of near empty spools as the AMS just handles those so well. Also did one layer based filament swap on the front piece to really make the lettering pop. As an added bonus, the lettering actaully has a nice backlight effect when the room is dim.
I used this LED strip from Amazon; the build took almost the entire 2m (6.5ft) worth.
https://www.amazon.ca/dp/B0C2P6Y9QN
You can see here the difference with the LED strip on/off..
LED strip off:
LED strip on:
Room lights off: