Screw micro-adjustment support, with mobile slide for Z axis for LU2-4-SF laser module model ORTUR OLM pro 2. Support made with reduced thickness to avoid having to vary the structure of the frame and standard homing parameters.

ASSEMBLY INSTRUCTION
Once the model has been printed it will be necessary to insert: 
1- two 4x115 mm calibrated pins into the guide holes;
2- an M5 hexagonal nut in the upper housing, also threading the molded hole M5;
3- insert the mobile slide with the M5 threaded bar equipped with the four counter nuts.
4-Secure the support with the four original screws to the plate on the frame.

5-Move the mobile slide to the upper part to be able to fix the head of the laser module from the back using the two original screws.

NB: Two short 4mm nails were used in the prototype, waiting to be replaced with two 4mm calibrated bars.