Print Profile(6)
Height 172 mm，0.2mm layer, 2 walls, 15% infill
Designer
3.8 h
2 plates
Height 120 mm，0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
2 plates
0.2mm layer, 2 walls, 15% infill
2.4 h
2 plates
60mm height, tree supports, 0.2mm layer, 2 walls, 15% infill
1.6 h
1 plate
Click to see more
Boost
275
377
77
4
839
809
Released
Description
Print using materials of two colors. The printing size can be enlarged or reduced according to personal needs. I use a mini printer, so the configured file size is relatively small.
！！！https://makerworld.com/zh/models/206599#profileId-226729！！！！！
Comment & Rating (77)
All
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
top one highly recommended
The designer has replied
1
Reply
Thanks for feedback
0
Reply
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
Pretty solid print. The bottom of my dog came off when I was cleaning the print. I’m sure that’s a problem on my end!
The designer has replied
1
Reply
😁
0
Reply
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
Fait avec la taille maximale de la X1C, en 0.16mm. ca m'a pris 14h
(Edited)
The designer has replied
1
Reply
😎
0
Reply
很棒的模型， 可惜我拆支撑的时候，它屁股也一块扯下来了
The designer has replied
1
Reply
打的很棒👍🏻
0
Reply
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
great print
1
Reply
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
Great Print!
Easy to change colors, no print issues on my X1C at all!
I also created a YouTube Review Video on this model and print!
Check it out: https://youtu.be/Ovp01VwxvX0?si=8cGPUdNnUm1biymt
The designer has replied
0
Reply
Thank you for your video, the video is very good!
(Edited)1
Reply
Print Profile
Height 172 mm，0.2mm layer, 2 walls, 15% infill
bellissimo!
1
Reply
Print Profile
Height 120 mm，0.2mm layer, 2 walls, 15% infill
perfect
The designer has replied
0
Reply
The print is very good
0
Reply
merci trop cool
The designer has replied
0
Reply
Not at all
0
Reply
Print Profile
Height 120 mm，0.2mm layer, 2 walls, 15% infill
Supports were a little difficult to remove from the glasses and the glasses didn't print real great. Overall a fun model!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld