Marble Vs. Jokers Board Game. 

Consists of 8 total board pieces, numbered accordingly. Will require marbles, and a deck of cards to play. Very fun and enjoyable game I've played numerous times. I found that buying these game sets was ridiculous as the cheapest ones are $70. So, I designed board pieces that are 3D printer friendly and way cheaper to make. It only cost $1.94 worth of filament per board piece, along with a $9.00 marble set I used (Although you could just 3D printer your own marbles). All extra information regarding marbles, print profiles, and settings can be seen below. Please reach out and comment if you have any questions. Hope you enjoy playing!

Printing Information

No Supports needed, very simple print
Prints as one-piece, and can be scaled down to fit your printers bed-size
Marbles used can be found below, otherwise you can always print your own
Detailed dimensions can be seen in the 2D drawing listed
8 total board pieces included
ANE Plastics brand only shows up if you “split parts” in your slicer software

Print Settings

210C Nozzle Temp
60C Bed Temp
15% Infill
Gyroid Infill Pattern
2 hours, and 31 minute print (single color)
3 hours, and 24 minute print (mutli-color)
 

Marbles Used

https://www.amazon.com/Laviesto-Replacement-Marbles-Checkers-Aggravation/dp/B097PKKB7M/ref=asc_df_B097PKKB7M/?tag=hyprod-20&linkCode=df0&hvadid=563661007371&hvpos=&hvnetw=g&hvrand=9577376503162492156&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1021434&hvtargid=pla-1598036724907&psc=1&mcid=adcc5f86ee433f648da80a37ccc8831d