Skip to content

Spring-loaded wall mount for WD40, Spray Paint Can, Super 77

IMG_8351.gif Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
WD40-and-Spray-Paint-Can-and-Super-77-holder_Screw-mount-cuttting-oil-wall-clip-spring-loaded.gif Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
IMG_8374.gif Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
WD40-and-Spray-Paint-Can-and-Super-77-holder.jpg Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
WD40-and-Spray-Paint-Can-and-Super-77-holder_Command-Stripe-Version_Medium-Size.jpg Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
72mm-Bernzomatic-Propane-Torch_-Wall-Mount-Clips.jpg Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
V2 64mm Top Clip for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
V2 64mm Bottom Support for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
V2 64mm Bottom Support Minimal for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
72mm Bottom Plate for Bernzomatic Propane Torch_ Command Strip Version_Large Size.stl Spring-loaded wall mount for WD40, Spray Paint Can, Super 77
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 25.8k views
  • 69 likes
  • 132 downloads
  • 1 collection
License
3D design format
STL Folder details Close
  • 72mm Bottom Plate Minimal for Bernzomatic Propane Torch_ Command Strip Version_Large Size.stl
  • 72mm Bottom Plate for Bernzomatic Propane Torch_ Command Strip Version_Large Size.stl
  • 72mm Bottom Plate for Bernzomatic Propane Torch_ Screw Mount Version_Large Size.stl
  • 72mm Top Spring Plate for Bernzomatic Propane Torch_ Command Strip Version_Large Size.stl
  • 72mm Top Srping Plate for Bernzomatic Propane Torch_ Screw Mount Version_Large Size.stl
  • Minimal Wall Clip 64mm Bottom Plate for WD 40 and paint cans.STL.stl
  • Round Wall Clip 64mm Bottom Plate Flat Surface for WD 40 and paint cans.STL.stl
  • Round Wall Clip 64mm Bottom Plate With Minimal Tab for WD 40 and paint cans.STL.stl
  • Round Wall Clip 64mm Top Spring Plate for WD 40 and paint cans.STL.stl
  • V2 64mm Bottom Support Minimal for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl
  • V2 64mm Bottom Support for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl
  • V2 64mm Top Clip for Paint Can and WD40 _ Command Strip Version_Medium Size.STL.stl

Learn more about the formats
Last update 2024-03-05 at 06:29
Publication date 2024-02-27 at 06:27
Design number 1819111
coopscustom

coopscustom

3D printer file info

3D model description

https://www.tiktok.com/t/ZTLd5VRb5/

I designed a spring-loaded wall-mounted clip to organize my paint and solvent cans and to keep them off the counter. The clip is simple and quick to use, and I tested it by making a lot of revisions. It is designed to fit standard spray paint cans, WD 40, mold release, Super 77 spray adhesive, and any other standard can size. You just need to pair the 64mm spring clip top with one of the three bottom support options.

The spring action of the clip allows for a quick automatic lock and release when you push the cans into place. To reinforce the spring action, you should print it flat on the build plate so that the layer lines help reinforce the spring. The clip is sized to fit the cans snug and tight, so if you want to be minimal, you can use only one top clip. In this case, you should add a thick rubber band or tape to the can to prevent it from sliding downward. I hope this clip will help you organize your shop as it did for me.

The "Round Wall Clip 64mm" original version is a screw-mount for all standard can sizes.

"V2 64mm" is designed for the medium or small-sized Command Strips.

The NEW "72mm" version is sized for the Bernzomatic Propane Torch 14.1oz (400g) and offered in a screw mount version and large-sized command strip version. Always follow warning labels and instructions on the bottles and canisters. Use at your own risk!

Thank you for all the support :)

3D printing settings

Print flat using PETG with 4-6 wall loop lines. Feel free to stretch it vertically if you'd like even more spring action for hanging orientation.

Use medium or small command strips. Don't use the hook and loop version as they are better for shear force not for pulling force.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.