The Sukhoi Su-27K now known as the Su-33, NATO reporting name: Flanker-D, is a Su-27 modified for carrier-based operations. The Su-33 has a strengthened airframe, arrester hook, folding wings and stabilizers, and larger wings and added canards for increased lift. Due to Russia not having many aircraft carriers, the Su-33 was only put into service on the Admiral Kuznetsov.

This kit card was suggested by hellomynameisjoe over on Thingiverse.

If you print the [Su-33 Flanker-D Kit Card Wings Folded Sprue] you can also print the [Su-33 Flanker-D Kit Card Body] if you don't want the wings folded.

Both Sprue and Sprue-less models included along with models of individual parts. If you are printing with the individual parts you will want:

Landing Gear Down:

Su-33 Flanker-D Kit Card Body x1

Su-33 Flanker-D Kit Card Fuselage Landing Gear Down x1

Su-33 Flanker-D Kit Card Vertical Stabilizer x2

Su-33 Flanker-D Kit Card Engine Right Landing Gear Down x1

Su-33 Flanker-D Kit Card Engine Left Landing Gear Down x1

Wings Folded:

Su-33 Flanker-D Kit Card Body Wings Folded x1

Su-33 Flanker-D Kit Card Fuselage Landing Gear Down x1

Su-33 Flanker-D Kit Card Vertical Stabilizer x2

Su-33 Flanker-D Kit Card Engine Right Landing Gear Down x1

Su-33 Flanker-D Kit Card Engine Left Landing Gear Down x1

Su-33 Flanker-D Kit Card Elevator Brace x2

Su-33 Flanker-D Kit Card Horizontal Stabilizer Folded x2

Su-33 Flanker-D Kit Card Wing Brace x2

Su-33 Flanker-D Kit Card Right Wing Folded x1

Su-33 Flanker-D Kit Card Left Wing Folded x1

In Flight:

Su-33 Flanker-D Kit Card Body x1

Su-33 Flanker-D Kit Card Fuselage x1

Su-33 Flanker-D Kit Card Vertical Stabilizer x2

Su-33 Flanker-D Kit Card Engine x2

while the fit is relatively snug, glue is recommended.

Print at a .2 mm layer height with 100% infill.

Edit 5/31/22: Fixed tolerances on Engines, Fuselage, and Body. if I missed anything please let me know.