One of my favorite films and books of all time Christine.

6 color print and it jumps between the same colors a couple times.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA BambuLab Matte Scarlet Red Transmission Distance: 2.1
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Dark Brown
At layer #8 (0.72mm) swap to Scarlet Red
At layer #9 (0.72mm) swap to Mandarin Orange
At layer #12 (1.04mm) swap to Ivory White
At layer #16 (1.36mm) swap to Dark Brown
At layer #21 (1.76mm) swap to Lemon Yellow for the rest