BACK TO THE FUTURE GMC VALU VAN DOC BROWN 1/24

This is the van used by "Emmett Brown" to transport the "DELOREAN" to the "TWIN PINES MALL" parking lot in the film "BACK TO THE FUTURE" .

I created it from scratch based on photographs and I must say it looks great, especially as you can print it with the roller shutter open or closed and the ramp open or closed.

(you decide which version you want).

Assembly manual in PDF format included.

The scale is 1/24th, but if you want, you can change it to make the van bigger or smaller.

(It's up to you.)

All parts are to be glued.

The chassis, roof and sides of the van are made in several parts to be printed with any printer on the market.

There are all the parts, even the mirrors, steering wheel and driver's seat.

The dashboard is detailed but not that of the real van.

The one supplied is very nice and detailed.

Have as much fun printing and building it, as I had modeling it.

As the van is made up of 40 parts to be printed, some of which have to be printed several times, such as tires, rims, headlights, indicators, spotlights and taillights, I put ----------x 2 or 6.stl in front of each file where the part has to be printed several times.

..........................................ENJOY..............................................

Scale:1/24

Material: PLA

Imprint: 0.12mm

Supports: Yes for some parts

Filling: 15% of total