Shark bottle opener - Use his teeth
Copyright Claim
Shark bottle opener - Use his teeth
Boost
36
23
9
Print Profile(4)
0.08mm layer, 3 walls, 25% infill
Designer
41 min
1 plate
0.16mm layer, 3 walls, 25% infill
Designer
29 min
1 plate
0.08mm layer, 3 walls, 25% infill
Designer
50 min
1 plate
0.16mm layer, 3 walls, 25% infill
Designer
26 min
1 plate
Boost
36
23
9
1
96
39
Released
Description
Shark-shaped bottle opener
At the back you can use the hole as a key ring
Print it with a 25% to 45% infill
I printed it with 25% and it is strong
3 walls to make it strong
Comment & Rating (9)
All
Print Profile
0.08mm layer, 3 walls, 25% infill
Perfetto provato 2 volte per aprire 2 birre e regge
The designer has replied
1
Reply
Fantastico...alla tua salute!
grazie
0
Reply
Print Profile
0.08mm layer, 3 walls, 25% infill
pretty cool design, printed in petg cf turned oit amazing. You need to learn the proper movement to not ruin it but once you do it works like a charm with no problem.
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
geht super 👍 vielen Dank
0
Reply
Print Profile
0.08mm layer, 3 walls, 25% infill
(Edited)
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.08mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.08mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.08mm layer, 3 walls, 25% infill
1
Reply
No more
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld