MANSIONS OF MADNESS 2ND EDITION 3D PRINTABLE INSERTS BY AM-MEDIA

These are 3D printable inserts for Mansions of Madness 2nd Edition, designed to organise ALL game components (miniatures, tokens, cards, etc) inside the original box.

• Easy to print as they do not require any supports
• Use a small amount of material, making them cost effective to produce
• Can be printed on most 3D printers with a minimum build volume of 205x205x205mm
• Are lightweight and do not add significant weight to the game box
• I will provide the files in STL format. I will also provide a PDF file with instructions on how to properly place the inserts inside the game box.

© 2023 www.am-media.biz - Please note that these Board game inserts are not an official product of Fantasy Flight Games or Asmodee North America. Mansions of Madness is a registered trademark of Fantasy Flight Games and Asmodee North America. I am not affiliated with Fantasy Flight Games or Asmodee North America, and these Board game inserts have not been tested or approved by them.

The inserts are printed on an Ender 3 with a vertical resolution of 0.32mm, which worked fine for me. These are simple inserts so quality may not matter to everyone, but feel free to print at a higher resolution if you want to.

My recommendation for the material is simple PLA as it is cheap and readily available online.

For insert number 8, I suggest turning off the cooling fan to avoid possible deformation (the piece is taller than the others). You can also use hairspray or other glue to ensure good bed adhesion, or activate a 3mm brim and remove it later.