Bambu Lab A1 Simple hydrometer holder

This is my second version, modified to mount on the A1 top frame

Round and rectangular simple hydrometer / thermometer holder

Link to my first version that attaches with velcro:

https://makerworld.com/en/models/209740#profileId-229686

Select the plate which model you are using

This is for a panel mount hydrometer.

for example:
https://www.aliexpress.com/item/4000103767097.html?

The stand it holds the hydrometer well, also leaves the back of the hydrometer wide open to measure the humidity in the air.

The stand slides in from the front and holds very well.

I recommend printing from PETG, but PLA will work just fine too.

1, Plate - A1_Hydrometer rectangle (clear ramp)

2, Plate - A1_Hydrometer round (clear ramp)

3, Plate - A1 with LED bar_Hydrometer rectangle

4, Plate - A1 with LED bar_Hydrometer round

Here is a link to my LED ramp

My LED ramp with switch

https://makerworld.com/en/models/133385#profileId-144663

My LED ramp with photoresistor, lights up automatically according to the LED on A1

https://makerworld.com/en/models/166991#profileId-183376