Summary

510 Cart Holder for 8 Cartridges and 2 510 Batteries

This simple Holder allows you to store up to eight 510 carts upright. Additonally you can store 2x 510 batteries with a max diamater of 12.3mm (~0.5 inch) in the middle.

License & Donation

510 Cartridge & Battery Holder © 2023 by David Peters is licensed under CC BY-SA 4.0. This means you are allowed to modify this work and share it with others and USE IT COMMERICALLY as long as you give credit to the original creator (me), and you share your derivative work under the same license.

If you would like to support my work, you can donate to my PayPal and follow my Twitter

Print Settings

Printer: 

Bambu Lab X1C

Rafts:                     

No

Supports: 

No

Resolution:                     

0.2mm

Infill: 

20%, Any/ Gyroid

                Filament:                                    Any Any                                    Any                    
                        

Notes:                    

Material & Brim

Any Material is suitable. I would use ABS since it is more heat resistante

Infill

I recommend using an infill of at least 20% and a minimum of 3 walls for your print. You can choose any infill pattern, but personally, I find the "Gyroid" infill to be ideal in terms of both print time and strength.