This is a new ship for my suspended Star Trek Collection..
The USS Voyager from the television series Star Trek Voyager.
The whole suspended ship was modelled using tinkercad.. the frame is seperated into 2 parts where you can print the the LED frame holder and add LED strip..
The installation of LED strip will need some soldering since the strip needs to turn sharp corners.
When installing the LED strip.. there will be a small hole on the back of the LED holder.. that you will run the whole LED strip through.. the hole is the size of the LED strip..
Run the LED strips though the channel and when you want to transition the LED strip 90degress.. you'll have to cut and add wires to it.. i tried bending the strips and the connection kinda disconnected.. and the rest of the LED strip didnt light up.. so i had to cut and add wires to all the 90degress bend.. i added silicone glue to keep it in place..
The back end of the voyager is also printed separately with the peg that holds them together..
I added multicolor print profile so feel free to change the colors as you see fit.. Have fun 3d printing..
If you would like to support me, you can join me on my buymeacoffee page.. |
By joining me as a supporter.. you'll be able to get behind the scenes information on my current projects as well as future projects.. |
And if you're looking to sell my prints.. you can join my merchant membership tier as low as USD10 a month.. |