Summary

The Phone Holder is specifically designed for JUCAD golf trolleys. It features cutouts for 5 magnets that secure your phone in place. To use the magnets, you will need a magnetic phone or a phone case that supports magnetic attachment. Some phones, such as those equipped with MagSafe technology, have this functionality built-in. Alternatively, you can place a magnetic plate inside your phone case or directly attach it to your phone. The size of the Phone Holder is designed to accommodate most phones for easy mounting during your golfing activities.

Bill of Materials (FROM AMAZON/ NO AFFILIATE LINKS)

-5x Small Magnets 30x10x1: Amazon Link
-Magnet Plate for your Phone (optional for phones without magnets/ mag safe)

LICENSE & DONATION

This design, along with my other creations, is offered for free, but your support is greatly appreciated. If you find this case useful, please consider supporting my work through my social media or donations. Thank you!
Twitter: @N0rmal_One
Paypal: paypal.me/davidpeters2

License

PHONE HOLDER FOR JUCAD GOLF TROLLEYS © 2024 by David Peters is licensed under CC BY-NC-SA 4.0.

Print Settings

Rafts: 

No

Supports:                     

Yes

Resolution: 

0.2 mm

Infill:                     

20%, Gyroid

Filament:
Any                         

MATERIAL & BRIM

This print can be created using a variety of materials, however I would recommend ABS since it is more suitable for higher temperatures on sunny days.

POSITIONING & SUPPORT

To achieve optimal print quality, minimize print time, and reduce material waste, it is recommended to rotate the model around the y-axis by 225.15 degrees (refer to the last picture). This alignment will ensure that the holder's large surface for your phone is parallel to the build plate. However, there will be an offset between the holder and the build plate due to the small ledge supporting your phone. The resulting gap created by the offset can be filled with supports during the printing process. This adjustment will help you achieve the desired results for your print.

INFILL

I recommend using an infill of at least 20% and a minimum of 3 walls for your print. You can choose any infill pattern, but personally, I find the "Gyroid" infill to be ideal in terms of both print time and strength.